DONGGUAN JUOSHI RUBBER PRODUCTS CO.,LTD.
ADD：Baoanwei lndustry Zone,GaoBu Town,DongGuan City,Guangdong Province
CHANGSHU JUOSHI RUBBER PRODUCTS CO.,LTD.
ADD：Liantang Lndustry zone,Shanghu Town,Changshu City,Jiangsu Province
Dongguan Zhuo Shi Rubber will introduce you to 4 ways to clean the anilox roller
First, jet cleaning method The baking soda softening cleaning medium is sprayed onto the surface of the anilox roll to crush the solidified ink to achieve the purpose of cleaning. Baking soda is easy to dissolve and non-toxic. When it collides with other substances, its crystals are easily broken and will not cause damage to the surface of the anilox roll and the wall of the ink. Therefore, this cleaning method has a good cleaning effect and is popularized and used. value.
Second, the manual cleaning method The cleaning agent is applied to the surface of the anilox roller, and the copper wire brush is used for cleaning the chrome metal anilox roller; the ceramic anilox roller must be cleaned with a wire brush. This type of cleaning method is convenient and does not cause pollution, but if it is not thoroughly cleaned, it will affect the ink transfer effect. It is suitable for low-net anilox rolls or non-dirty anilox rolls.
Third. Strong Corrosion Chemical Cleaning Method Apply the corrosive bismuth solution evenly on the surface of the anilox roll. If necessary, wrap the enamel layer of plastic products on the surface of the anilox roll to prevent the liquid from evaporating, and ablate the anilox roll for 1 to 48 hours. After the ink to be cured is sufficiently softened, the anilox roller is cleaned by a manual cleaning method using water or an alcohol solution (no acidic solution such as acetic acid). Such a cleaning method has a good cleaning effect, but has a corrosive effect on the anilox roller and causes environmental pollution.
Fourth. Ultrasonic cleaning method The anilox roller is immersed in an ultrasonic cleaning tank filled with a chemical cleaning solution. When cleaning, the anilox roller slowly rotates, and the frequency conversion device capable of transmitting high frequency sound waves in the liquid pool starts to work, so that the solution The vibration generates bubbles to cause an inward explosion, and the continuous inward explosion force ejects the ink from the cells, and the cleaning time flows for 15 to 45 minutes.
Learn more about www.juoshi.com